### Relative Stability Enhancement for Brushed DC Motor Using a PLL Interfaced with LabVIEW

#### Abstract

#### References

[ 1] Theraja, B.L. and Theraja, A.K., 2017. Textbook of Electrical Technology Volume II IN SI System of Units. S. Chand.

[ 2] National Instruments, 2012, “LabVIEW Basics I Course Manual”.

[ 3] S.C. Goyal U.A. Baksh, “Feedback Control Systems Technology & Engineering, pp. 218-238.

[ 4] Efim Rozenwasser, Rafael Yusupov, “Sensitivity of Automatic Control Systems”, CRC Press, Nov 23, 1999 - Technology & Engineering, pp.10–55.

[ 5] Parmar, S., Chudasama, K., Vankar, J. and Gohil, A., March 2018, “Monitoring and Control of Speed of a DC Motor using LabVIEW Environment”.

[ 6] National Instruments, 2011, “DAQ USB-6211 User Manual”.

[ 7] Vikhe, P., Punjabi, N. and Kadu, C., 2014, “Real Time DC Motor Speed Control using PID Controller in LabVIEW”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 3(9), pp.12162-12167.

[ 8] Ganesh, M.S., 2013, Mr. Joseph Mathew K, “Intelligent Speed Control System for Automobiles”, International Journal of New Trends in Electronics and Communication (IJNTEC-ISSN: 2347-7334), 1(2), pp.1.4.

[ 9] Memon, A.P., Khan, W.A., Memon, R.H. and Akhund, A.A., 2013, “Laboratory studies of speed control of DC shunt motor and the analysis of parameters estimation”, International Journal of Emerging Trends in Electrical and Electronics (IJETEE–ISSN: 2320-9569), 9(1).

[ 10] Soni, R., Singh, D.B.V., Pandey, P. and Sharma, P., 2013, “Simulation of Optimal Speed Control for a DC Motor Using Conventional PID Controller and Fuzzy Logic Controller”, International Journal of Information and Computation Technology, 3(3), pp.181-188.

[ 11] Theraja, B.L. and Theraja, A.K., 2017. Textbook of Electrical Technology Volume II IN SI System of Units. S. Chand.

[ 12] Angalaeswari, S., Kumar, A., Kumar, D. and Bhadoriya, S., 2016 December, “Speed control of permanent magnet (PM) DC motor using Arduino and LabVIEW”, Computational Intelligence and Computing Research (ICCIC), IEEE International Conference on (pp. 1-6), IEEE.

[ 13] Gowthaman, E. and Balaji, C.D., 2013 March, “Self-tuned PID based speed control of PMDC drive”, Automation, Computing, Communication, Control and Compressed Sensing (iMac4s), International Multi-Conference on (pp. 686-692), IEEE.

[ 14] Sarhan, H., 2014, “A software-based gain scheduling of PID Controller”, International Journal of Instrumentation and Control Systems, 4(3), pp.1-10.

[ 15] Bharati raja, C., Munda, J.L., Vaghasia, I., Valiveti, R. and Manasa, P., 2016, “Low cost Real Time Centralized Speed Control of a DC Motor Using Lab view-NI USB 6008”, International Journal of Power Electronics and Drive Systems, 7(3), pp.656.

[ 16] Fagiri, M.A. and Nerma, M.H., 2015, “Effect of proportional integral controller in the stability of direct current motor”, International Journal in IT & Engineering, 3(3), pp.210-220.

[ 17] Mehedi, S.T., December 2014, “A DC Motor Armature Speed Control with PID Controller”.

[ 18] Patton, J.L., Lee, W.A. and Pai, Y.C., 2000. Relative stability improves with experience in a dynamic standing task. Experimental Brain Research, 135(1), pp.117-126.

[ 19] Shenton, A.T. and Shafiei, Z., 1994. Relative stability for control systems with adjustable parameters. Journal of guidance, control, and dynamics, 17(2), pp.304-310.

[ 20] Barth, E.J., Zhang, J. and Goldfarb, M., 2003. Control design for relative stability in a PWM-controlled pneumatic system. TRANSACTIONS-AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL, 125(3), pp.504-508.

[ 21] Angalaeswari, S., Kumar, A., Kumar, D. and Bhadoriya, S., 2016 December, “Speed control of permanent magnet (PM) DC motor using Arduino and LabVIEW”, Computational Intelligence and Computing Research (ICCIC), 2016 IEEE International Conference on (pp. 1-6), IEEE.

[ 22] Nautiyal, G., Singh, H., Pandey, M., Rana, R. and Rawat, S., 2017, “Modified Microcontroller based Speed Control of a DC motor using PWM”.

[ 23] Sharief, S.E.M. and Sanhoury, I.M., 2017, “Speed Control of Direct Current Motor via Pole Placement Control”, University of Khartoum Engineering Journal, 7(1).

[ 24] Trinh, H.H. and Le, T.D., 2016, “DC Model-based IMC Method for Brushless DC Motor Speed Control”, Journal of Automation and Control Engineering, Vol. 4(2).

[ 25] Dorf, R.C. and Bishop, R.H., 1998. Modern Control Systems: Solutions Manual. Addison-Wesley.

[ 26] Paraskevopoulos, P.N., 2017. Modern control engineering. CRC Press.

[ 27] Dorf, R.C. and Bishop, R.H., 2011. Modern control systems. Pearson.

[ 28] Grantham, W.J. and Vincent, T.L., 1993. Modern Control Systems Analysis and Design: Analysis and Design. John Wiley & Sons, Inc.

DOI: http://doi.org/10.11591/ijpeds.v11.i2.pp%25p

### Refbacks

- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.