Conducted emission study in space vector modulated voltage source inverter

Uma Maheswari Yuvaraj, Amudha Alagarsamy, Ashok Kumar Loganathan, Selvathai Thavassy

Abstract


To comply with electromagnetic interference (EMI) standards, the electromagnetic noise generated by power electronic converters must be analyzed and suppressed since the switching frequency of the converter affects EMI noise. Conducted emission occurs in drive systems due to inverter parasitic capacitances and rapidly switching inverter output voltages. The EMI noise produced space vector pulse width modulation (SVPWM) inverter is calculated using MATLAB/Simulink simulation data. The unwanted common mode and differential mode signals produced by the inverter are captured using a spectrum analyzer and examined using short time Fourier transform (STFT). To mitigate the effect of EMI in the circuit and to comply with the standards filters are developed. The passive filter components are defined by the EMI standards attenuation requirements. The MATLAB simulation findings are confirmed and verified by hardware implementation.


Keywords


Conducted emission; EMI filter design; STFT; SVPWM

Full Text:

PDF


DOI: http://doi.org/10.11591/ijpeds.v13.i2.pp%25p

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.