Performance investigation of bridge-less power factor correction circuit with MOSFET
Abstract
The aim of this paper is to study and investigate the performance of power factor correction (PFC) circuit implemented with the semi bridge-less configuration. The transistor-diode module APT50N60JCCU2 has been used in the proposed circuit and the UCC28070 controller has been used as a controlling device for the power factor correction (PFC) circuit. Testing has been performed in two steps. In the first step, the test was conducted
on (230 Vac), while in the second step, the test was conducted on (115 Vac) as alternating input voltages. The testing results of both voltages were compared and analyzed in terms of efficiency, power factor, total harmonic distortion (THD) in order to determine the efficiency of the power factor correction circuit. The results obtained indicate that this circuit has efficiency up to 97% and a power factor close to 0.91 with the input voltage of 230 V.
on (230 Vac), while in the second step, the test was conducted on (115 Vac) as alternating input voltages. The testing results of both voltages were compared and analyzed in terms of efficiency, power factor, total harmonic distortion (THD) in order to determine the efficiency of the power factor correction circuit. The results obtained indicate that this circuit has efficiency up to 97% and a power factor close to 0.91 with the input voltage of 230 V.
Keywords
Bridge-less; MOSFET; PFC; Total harmonic distortion
Full Text:
PDFDOI: http://doi.org/10.11591/ijpeds.v14.i3.pp1368-1373
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Khaleel Ali Khudur, Nabeel Mohamed Akram Samad, Ghanim Thiab Hasan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.