Ferrite-based magnetic shielding for efficiency enhancement in resonant inductive wireless power transfer systems

Abstract

This paper presents a detailed simulation-based investigation of ferrite-based magnetic shielding to enhance the efficiency and electromagnetic performance of resonant inductive wireless power transfer (RIPT) systems, with a particular emphasis on electric vehicle (EV) wireless charging applications. Two system configurations, a baseline coil-only system and a ferrite-shielded system, were modelled and simulated using CST Studio Suite 3D electromagnetic simulation software under identical geometric and electrical conditions to ensure a fair comparative evaluation. Key performance metrics, including power transfer efficiency (PTE), H-field distribution, and magnetic flux confinement, were analyzed to quantify the shielding impact. The ferrite-shielded configuration achieved a PTE improvement from 98.29% to 99.01%, demonstrating stronger flux concentration, reduced leakage, and lower electromagnetic interference (EMI) exposure. Additional analyses highlight the trade-offs in ferrite integration, including potential core loss, material cost, and thermal drift, while also discussing the system’s robustness against coil misalignment and its alignment with SAE J2954 and IEC 61980 standards for EV charging. The study is limited to a simulation-based approach without experimental validation; however, the findings establish a solid foundation for future hardware prototyping and hybrid shielding exploration, integrating ferrite and composite or metamaterial-based structures. Overall, this work contributes to the development of efficient, EMI-compliant, and thermally stable WPT systems suitable for next-generation EV charging infrastructures.